PM174
The PM174 is an analyzer providing the full range of power quality monitoring and reporting, according to the IEEE 1159 standard.*
Equipped with built-in digital I/Os and a serial communication interface supporting SCADA-driven protocols, it is suitable for integration in utility substation or industrial SCADA systems. Its powerful LED 7-segment display shines visibly in the darkest environments, facilitating a quick reading of crucial power parameters on-site. Likewise, it is equipped with a LED load-bar, enabling the viewing of load percentage at a glance.
* For EN50160 analysis see
PM175
PM172
The PM172 is a Class 0.2S/0.2 power meter designed for high-accuracy metering of three-phase AC circuits.
Equipped with built-in digital I/Os and supporting numerous communication protocols, it is suitable for integration in utility substations or industrial SCADA systems.
The PM172 offers capabilities for basic power quality monitoring, providing calculations such as harmonics, THD, TDD and K-factor.
Its powerful LED 7-segment display shines visibly in the darkest environments, facilitating the quick reading of crucial power parameters on-site. Likewise, it is equipped with a color LED load-bar, enabling the viewing of load percentage at a glance.
BFM136
Fitting for both new and retrofit projects, SATEC’s Branch Feeder Monitor™, is a multi-circuit power meter, monitoring up to 12 three-phase power circuits or 36 single-phase, or any combination. The BFM136 utilizes High Accuracy Current Sensors (HACS) and is ideal for a wide range of applications, from monitoring medium-voltage substations through commercial multi-tenant billing in shopping-centers or office buildings.
The BFM136 is a highly reliable piece of equipment featuring a rugged design for a long life of uninterrupted service.
EM920
The EM920 is the ANSI version of the eXpertMeterTM Series of multifunctional power analyzers. This series was designed to deliver two functionalities that are present in every substation, in a single device:
Combining these functions simplifies design and eliminates redundancy.
RGM180
The RGM is a 5.7’’ color graphic touch-screen, used for the display of information such as real-time parameters, waveforms or phasor diagrams.
The RGM can interface one single device or up to 32 SATEC devices over serial communication, or up to 36 devices over 10/100 Base-T Ethernet.
EM132
SATEC EM132 is a multifunction power meter and transducer, ideal for a wide range of applications such as industrial power monitoring and for interfacing SCADA in utility substations. The EM132 can be fitted with a wide range of communication interfaces and I/O extensions, making it a cost-effective combination of a power meter, smart transducer and PLC controller. It is designed for DIN-rail mounting, equipped with built-in communication ports, digital I/Os and anti-tamper enclosures.
ETC One Plus
The ETC ONE serves as a transparent gateway, connecting several serial-communication devices to the internet or local area network, either via ETH port or via cellular communication. Both are available as device extensions.
The ETC ONE Plus converter supports up to 32 devices in serial communication in Modbus protocol.
EDL180
The EDL180 is a portable version of the Class A (Edition 3)
PM180 power quality analyzer
, which holds extensive track record serving as the platform for power quality monitoring systems in worldwide national grids.
Equipped with a 24V battery for backup power supply and flexible current clamps, it is fitted in a lightweight traveling bag for convenient handling.
ETC-II
The ETC-II Gateway, Data-logger and gateway allows data accumulation from instruments in background mode, using Modbus protocol (as Modbus master). A total of 64 address ranges can be defined. The data is stored in a buffer where 120 16-bit registers are reserved for each server address range. Users can specify up to 120 contiguous registers (per address range) in the connected instrument to be continuously polled and updated in the server register array. Any number of device register ranges can be defined for each instrument.
DC Accessories
Based on the PRO Series meters, SATEC provides a unique comprehensive solution for DC metering.
The current sensing technology used by the PRO is that of Hall Effect Sensors.
The voltage reading is performed by direct measurement, rated up to 820V DC.
The challenges that arise in this application:
Hall Effect Sensors require an external power supply
Many DC systems are rated at 1,500V DC
Please see below the accessories we offer to provide power supply and read voltages higher than 820V DC
