Market Segment
Power Monitoring Solutions for Renewables & BESS
Frequently Asked Questions
How does SATEC meter the DC side of a BESS or PV plant?
SATEC PRO DC meters combined with UHACS high-accuracy current sensors measure DC voltage, current, power and energy at selected PV DC feeders, inverter inputs and BESS battery-side measurement points. The solution supports bidirectional DC energy monitoring, performance analysis and energy accounting, with VRM modules available for higher-voltage applications.
What does SATEC measure at the point of common coupling (PCC)?
SATEC provides several complementary monitoring solutions at the PCC. EM720 supports high-accuracy revenue/check metering and power quality monitoring. PM180 provides Class A power quality analysis, disturbance recording and PMU functionality on supported configurations. PMU PRO provides dedicated synchronized phasor, frequency and ROCOF measurements. Together, these solutions support grid-connection monitoring, energy accounting and verification of applicable grid-code requirements.
Does SATEC support PMU / synchrophasor measurement for renewable plants?
Yes. SATEC PMU PRO and PMU-enabled PM180 analyzers provide precisely time-synchronized voltage and current phasors, frequency and ROCOF measurements. These measurements support grid-dynamics monitoring, disturbance analysis and compliance assessment where synchrophasor data is required by the grid operator.
Can SATEC measure fast frequency response and ancillary services for BESS?
Yes. SATEC PM335 PRO and EM235 PRO provide high-speed frequency and active-power measurements, including 20 ms data updates in supported configurations, along with event recording. Measurement data can be communicated to the BESS controller or Plant Power Controller (PPC), supporting frequency-response and ancillary-service applications. The controller manages the required battery/inverter response.
Does SATEC provide revenue metering for renewable and storage plants?
Yes. SATEC offers high-accuracy import/export energy metering for generation facilities, BESS installations and grid-connection points, supporting energy accounting, settlement and Power Purchase Agreement (PPA) reporting. Meter selection and certification must comply with the applicable utility, contractual and local metrology requirements.
Solar PV, wind generation and battery energy storage systems are increasingly connected to power systems through inverter-based resources. Operators need accurate electrical data to measure energy production, verify grid performance, analyze disturbances, monitor power quality and demonstrate the response of renewable and storage assets.
SATEC provides AC and DC metering, power-quality analysis, synchronized phasor measurement, fast frequency-response measurement and system-integration tools — from the DC source and inverter level to the point of common coupling and grid connection.
What Renewable and BESS Operators Need to Measure
- Energy production and settlement — imported/exported active and reactive energy for performance and settlement.
- DC-side performance — DC voltage, current, power and energy before power conversion.
- Power quality — harmonics, voltage variations, unbalance and disturbances at inverters and the PCC.
- Frequency and dynamic response — frequency, active power and event data for BESS and ancillary services.
- Time-Synchronized PMU Monitoring — time-synchronized phasor measurements where grid codes require them.
- SCADA / PPC / EMS integration — real-time data, alarms and events to plant controllers and supervisory systems.

Renewable & BESS Applications

DC Metering & BESS Grid Services
DC-side measurement provides visibility before the inverter stage. SATEC’s DC metering platform is based on the PRO Series with UHACS current sensors to measure DC voltage, current, power and energy and correlate DC-side performance with AC export or charging/discharging. Explore DC Metering.
BESS projects require more than a conventional meter: bidirectional revenue or check metering, power-quality monitoring, high-resolution frequency and active-power measurement, event recording, PMU data and integration with the plant controller — making BESS one of the strongest cross-solution applications for SATEC.
Core SATEC Solutions for Renewables & BESS
DC Metering — DC voltage, current, power and energy on the PV or battery side. Learn more
Power Quality Analysis — PQ at inverter outputs, collector systems and the PCC. Learn more
PMU — synchronized phasor, frequency and ROCOF measurements for grid-connected plants. Learn more
Fast Frequency Response (FFR) — high-resolution frequency and active-power response for BESS. Learn more
SCADA Power Monitoring — integrate with plant SCADA, PPC and EMS. Learn more
Billing / Revenue Metering — settlement and check metering at generation and grid-connection points. Learn more
Relevant SATEC Product Families
- PRO Series — flexible AC/DC metering platform for renewable and BESS applications with UHACS.
- PM180 — advanced power quality, disturbance/event recording and PMU-capable applications.
- EM720 — utility/revenue metering where the required accuracy class and approvals are met.
- ExpertPower — centralized data collection, analysis, reporting and integration.
Technical Monitoring Architecture for Renewables & BESS
Electrical paths and communication links shown separately