PM17x PRO

Multi-function Analyzers

Equipped with a bright LED display, the PM17x PRO Series power quality analyzers combine the familiar look and feel of the PM17x legacy models with the advanced PRO Series capabilities.
To top this, the PM17x PRO analyzers introduce unique features, available only in the PM17x sub-series, such as an IRIG-B
input and a fourth voltage input (V_ref).

Featuring multiple protocols (IEC 61850, DNP3 and IEC 60870-5-101/104) and dual-port ethernet, it is the ultimate solution for power monitoring, meeting and exceeding current requirements in utility and industrial applications.

Revenue Meter: Class 0.2/0.2S accuracy
Wide-range Inputs: 1,000V AC

Power Quality

Class A, Ed. 3.1 analyzer per IEC 61000-4-30 (PM174/5 PRO)
EN50160 reports (PM175 PRO)
IEEE 1159 reports (PM174 PRO)
IEEE 519 harmonic analysis
Waveform capture and recording
Up to 0.0001 Hz resolution
Leakage current detection via 4th current input

Communication

Dual Port Ethernet: RSTP support
IEC 61850
Open protocol: Modbus RTU; DNP3.0; IEC 60870-5-101/104;

Digital & Analog I/O

Built-in I/O: 1 RO; 2 DI; 1 AI

Multi-option Current Inputs

5A or 1A
40mA for HACS CTs (100-3,000A)
RS5: clip-on 5A HACS for retrofit
LPIT: RJ45 inputs supporting LPIT Sensors; up to 650A primary current, and a secondary of 80 A/150 mV @ 50 Hz and 80 A/180 mV @ 60 Hz

Multi-Functional 3-Phase Power Meter

Voltage, current (including neutral current), power, energy, power factor, frequency, voltage/current unbalance
Ampere/Volt demand meter

Power Quality

Class A, Ed. 3.1 analyzer
EN50160 reports and statistics (PM175: EU version)
IEEE 1159 reports and statistics (PM174: US version)
Voltage Dips/Sags, Interruptions, Swells, Unbalance, Transient and THD events recording
THD of voltage and current, custom alarming, TDD, K factor, Crest factor
Individual harmonics, up to the 63^rd harmonic
IEEE 519 harmonic analysis

Waveform Capture and Recording

Provides simultaneous capture for all voltage and current channels with choice of sample rate, up to 256 samples/cycle
Selectable pre-fault / post-fault recording length.

Variable Current Inputs

Standard 1A or 5A current inputs
40mA inputs, designed for SATEC HACS CTs
RS5: Special 5A input for 5A clip-on HACS for retrofit installation on existing MV/HV CT secondary.
LPIT: RJ45 inputs supporting LPIT Sensors; up to 650A primary current, and a secondary of 80 A/150 mV @ 50 Hz and 80 A/180 mV @ 60 Hz

Revenue Grade Meter

Class 0.2S/0.2 per IEC 62053-22/ANSI 12.20
Advanced Time Of Use (TOU) features for complex billing schemes: 16 Energy sources include external digital pulses, up to 4 seasons, 4 daily profiles, 8 Tariffs, flexible automatic calendar

Logging Recording and Programming

Onboard memory: 16GB
Programmable controller: up to 64 control setpoints, up to 8 conditions OR, AND, arithmetical functions logic, extensive triggers, programmable thresholds and delays, relay control, event-driven data recording
Waveform sampling rate 32, 64, 128 or 256 samples per cycle
1-ms resolution for digital inputs
16 fast Data Recorders (16 parameters on each data log): From ½ cycle RMS to 2 hour RMS envelopes; programmable data logs on a periodic basis and on internal or external trigger
32 digital internal counters for counting pulses from external sources and internal events
16 internal programmable timers (½ cycle to 24 hours)

Compliance

The PM17x PRO analyzers are designed to comply with IEC/AS 62052-11, IEC 62053-22/24, IEC 61557-12 (PMD-Sx), EN 50470 and ANSI C12.1/20 standards.

Built-in I/O

1 AI (±1 mA; 0-1 mA; 0-20 mA; 4-20 mA)
1 SSR (100mA/250V AC/DC)
1 DI (DRC, Internally wetted @ 24VDC)

Programmable Logical Controller

Embedded programmable controller
64 control set points; programmable thresholds and delays
Relay output control

Display

PM17x PRO: 3-row, 7-segment, bright LED display
(2 x 4 characters + 1 x 6 characters)

RPM07x PRO: No display (transducer version)

Real Time Clock

Built-in clock and calendar functions
Typical error ±15 seconds per month / < 5 minutes/year @ 25˚C
1ms synchronization over SNTP
IRIG-B

Power Supply

Default: 100-277V AC / 100-290V DC

optional (DC AUX): 24V DC (9-36V DC)

Communication Ports

Standard 2-wire RS-485 serial
2 x ETH 10/100Base-T (Dual Port Ethernet)
USB type-C

Communication Protocols

IEC 61850
Modbus RTU/TCP
DNP 3.0/TCP
IEC 60870-101/104

Meter Security

Three-level Password security for protecting meter setups and accumulated data from unauthorized changes
Anti-tamper design

Mounting

Panel mount (4” round / 92×92mm square cutouts)
DIN-rail mount (RPM07x)

Downloads

Datasheet
- PM17x PRO Datasheet
Manual
- PM17x PRO User Manual
Communication
ICD Files
- IEC 61850 Ed. 1
- IEC 61850 Ed. 2
Power Quality Recording
- EN 50160
- IEEE 519
DC
- DC setup guide for PRO with UHACS

Plug-In Modules & External Accessories

The PRO Series’ modular configuration enables users to assemble a system that meets their specific needs.

Digital & Analog I/O Options

Built-in I/O: 2 digital inputs; 1 SSR output; 1 analog input
Add-on I/O: Up to 3 add-on I/O modules

Module Configuration

Up to 4 Expansion Modules Side by Side
Up to 2 expansion modules: self-energized
3 expansion modules: requires additional module of AUX power supply

DC Auxiliary Power Supply

24V DC (9-36V DC)

The PM17x PRO models are identical in physical appearance and mounting/installation, and differ only in functionality

PM175 PRO

Panel-mounted Class A Ed. 3.1 power quality analyzer monitoring voltage, current, power, frequency and energy measurements.

PQ statistics & reports: per the European EN50160 standard

PM174 PRO